CINEVATE AXIS JIB

The Cinevate Axis Jib features a 6 ft single-tube aluminum arm with all mechanical components enclosed inside. The arm provides a 4 ft reach from the fixed tripod mount yoke and a 7 ft vertical arc. It was designed stress-tested for maximum stiffness with 3D modeling software and supports a 50 lb payload. 

The tripod mount yoke features a 100mm half-ball, pan and tilt locks, a magnetic dry-erase marker ring on each side, and a variety of accessory mounting threads. The marker rings are removable. The fluid head end features a 100mm bowl and is adjustable to three different positions, including under-slung for low angle shots. 

The rear handles are 1" in diameter and support all standard dumbbell weights for counterbalance. Weights are not included. A 2 lb trim weight underneath the handles is slide-adjustable to fine-tune balance, and an integrated bubble level will help measure the adjustments. A 63" soft case with wheels is included for transport.

​

Key Features

​

• Single-tube arm with mechanical components enclosed inside 

• 4 ft reach, 7 ft vertical arc, and 50 lb payload 

• Integrated 100mm tripod-mount half-ball 

• 100mm fluid head bowl 

• Pan and tilt locks 

• 3-position adjustable head-end 

• 2 lb slide-adjustable trim weight 

• Magnetic dry-erase marker rings on both sides 

• Integrated bubble level 

• Variety of accessory mounting threads 

• 1" diameter handles support standard dumbbell weights 

• Stress-tested for maximum stiffness 

• 63" soft case with wheels is included